96 Core Air Blown Fiber Optic Cable For Duct Use Small Diameter PE
Anti Rodent Jacket
The fibers, are positioned in a loose tube made of a high modulus
plastic. The tubes are filled with a
water-resistant filling compound. A Fiber Reinforced Plastic (FRP)
wrapped with a layer of PE locates in the center of core as a
non-metallic strength member. The tubes (and fillers) are stranded
around the strength member into a compact and circular core. Then
the cable is completed with a PE sheath.
◆ Adopted to Outdoor distribution
◆ Trunk power transmission system
◆ Access network and local network in high electromagnetic
◆ Excellent mechanical and environmental performance
◆ Fiber: Up to 288, Gel-filled
◆ Fiber Types: Single-mode and Multimode
◆ Operating Temperature: -40℃ - 70℃
◆ Compliances:In Accordance with IEC,ITU and EIA standards
4. Cable construction details
|Fiber type||G652D||Concentricity error||≤0.5um|
|Cladding diameter||125±1um||Fiber color||Standard spectrum|
|Loose tube||Material||PBT||Color||Standard spectrum|
|Central strength member||Material||FRP|
|Water blcoking system||Material||Filling gel|
5. Cable Mechanical characteristic
|Tensile strength||Long term(N)||300N|
|Crush load||Long term||200N/100mm|
1. Packing material: Wooden drum.
2. Packing length: standard length of cable shall be 2 km. Other
cable length is also available if required by customer.
7. Cable marking and cable reel marking
Natural marking or according to customer's requirements.
8. Company workshop